Crystal Studio

One Click

We pick the best settings and build it as soon as you upload. Want control? Premium lets you fine-tune everything.

Clean the background in your image tool, then upload that photo. We build your crystal as soon as it is ready. Choose the crystal, a mask, and a quality, then make the file for your laser.

2 · Crystal

My saved setups

Save this crystal, size, quality, outline, lettering and tone as a setup (for example "Dog memorial 50×80"), then use it again in one tap.

Your laser5 W UV. Inner engraving area is 70 × 70 mm, up to 150 mm tall. Import the PLY in xTool Studio.

Face widthmmFace heightmmThicknessmm

Laid flat sits on its back. Face width and face height are the engraving face. Thickness is through the blank.

Common sizes

50 wide × 80 deep × 50 high, laid flat.

Type any size, up to 9999 mm a side. The xTool F2 Ultra UV engraves inside 70 × 70 mm; bigger sizes show a note but still download.

3 · 3D depth

Each photo gets its own depth: deeper for scenes and full figures, shallower for faces and logos.

K9 crystal, at least 8 mm of clear glass on every side.

4 · Mask

Selected mask · Full frame. The mask trims the point cloud inside the crystal. Auto follows the blank.

Text on the crystal (optional)

A name, a date or a short message under the photo. The photo moves up and shrinks evenly to make room.

Start from an occasion

Line 10/40Line 20/40

Quick add (fills an empty line)

Symbols

LetteringSize

Letters5.5 mmPosition

5 · Quality

More points give more detail and a longer burn. Standard suits most photos; Premium is for detailed portraits and big crystals. Log one burn with its time in the Burn log and every quality shows a burn-time estimate for your laser.

1 · Photo

Drop a photoClick here or drop a photo of a person, a pet or a favourite thing.

Photos: JPG, PNG, iPhone HEIC, WEBP, BMP, TIFF, GIF (first frame).

One photo makes a front relief, centered in the blank. It is not a full figure.

Several photos? Make them all at once

Every photo gets the same crystal (Laid Flat), quality (standard) and laser (xTool F2 Ultra UV). Each file downloads when it is ready; your browser may ask once to allow several downloads. Keep this tab open while it runs.

Choose photosBackground for every photo

Order number (optional, starts each file name)One zip at the end

Text on the crystal applies to every photo, so leave it empty for different names. Check one finished crystal before you burn them all.

Tap Use the sample rose, or upload a photo and pick a background choice.

Old, blurry or busy photo? Copy our AI photo-prep prompt

AI recreation prompt

Better source photos make better engravings.

Prepare this photo for a 3D laser engraving inside clear crystal. Work through these steps in order.
1. Background, most important: Cut the subject out completely. Replace everything behind it with pure white or full transparency. Leave no shadows, gradients, floor, walls, glow, smoke, or stray objects. Keep fine edges like hair, fur, and glasses frames.
2. Lighting: Light the subject evenly from the front so no part of the face or body falls into deep shadow. Brighten the image overall without washing out highlights.
3. Contrast and tone: Increase contrast and midtone detail so skin, fabric, hair, and fur show clear texture. Darks stay dark and lights stay light, with smooth steps in between.
4. Sharpness: Sharpen so eyes, outlines, and small details are crisp. Do not add grain, halos, or noise.
5. Framing: Crop close so the subject fills at least 75% of the image. Keep the subject centered and upright, with a small even margin.
6. Faithfulness: Do not change who the subject is. Keep the face, expression, age, glasses, hairstyle, skin tone, tattoos, piercings, clothing, and every other feature of each person or animal exactly as they are. Do not add, remove, or invent anything.
Return one clean, high-resolution image of only the subject on white or transparency.

Results vary by photo and machine. Test a small burn before a full crystal.

6 · Generate

Generate to count the points in the PLY

The file your laser reads. Each dot is one burned point.

Import the PLY in xTool Studio and choose Keep size. Never scale the cloud after export, because scaling changes the dot spacing.

Export orientation (PLY and GLB)File: X width · Y depth · Z height

Add a photo first. This button opens as soon as the preview is built (it builds by itself).

Generate matches the preview to the file. Change a size or spacing and the cloud is out of date until you generate again.

Crystal

Block · 50 × 80 × 50

Add a photo to start. Your crystal appears here.

Laid Flat 50 x 80 x 50 mm

Standard - 1,500,000 points